|
|
Post by ALLUP on Jul 10, 2016 17:11:35 GMT -5
I'VE CON VERTED A TREADMILL INTO A ROCK TUMBLER THAT ROTATES THREE 5 GALLON BUCKETS. THE TREADMILL WORKS OFF A TIMER THAT ONLY ALLOWS THE TREADMILL TO ROTATE 90 MINUTES AT A TIME. DOES ANYBODY HAVE ANY SOLUTIONS ON HOW I CAN BYPASS THE TIMER OR WHAT ELSE I CAN DO ?
|
|
Mark K
Cave Dweller 
Member since April 2012
Posts: 2,816 
|
Post by Mark K on Jul 16, 2016 19:55:53 GMT -5
It's like Déjà vu all over again.
|
|
|
|
Post by Rockoonz on Jul 17, 2016 0:15:12 GMT -5
The timer will probably power a relay that could be hard wired to a switch, I could do it most likely but giving someone instructions without a wiring diagram is not possible.
If you have never worked on electric devices you need to find an electrician.
|
|
Mark K
Cave Dweller
Member since April 2012
Posts: 2,816
|
Post by Mark K on Jul 17, 2016 15:15:04 GMT -5
This is just spam. This exact same thread has been here at least one other time. He signs up, posts and then cancels his membership.
|
|
