Fossilman
Cave Dweller 
Member since January 2009
Posts: 20,723 
|
Post by Fossilman on Feb 4, 2017 17:40:16 GMT -5
I 'm looking for the screw that holds the blade table to the saw....The model is the Little Rascal J six inch..............I will be looking for it again tomorrow,but probably won't find it.......
Any of you all,have any extra laying around???
|
|
vera
spending too much on rocks
Member since December 2016
Posts: 259 
|
Post by vera on Feb 4, 2017 19:23:33 GMT -5
If you know the name of the manufacturer, you can google the company and go to their website where you should be able to layout for parts and part numbers for your machine. Then you could either order the correct screw from the company or get the specifics for the screw and pick one up at a hardware store.
|
|
minerken
Cave Dweller
Member since August 2013
Posts: 466
|
Post by minerken on Feb 4, 2017 19:45:12 GMT -5
Fossilman mine is a 8-32 x 1/8 screw. I replaced mine with a flathead machine screw with a hex for an Allen wrench should be able to find in ace or any other hardware store.
|
|
minerken
Cave Dweller
Member since August 2013
Posts: 466
|
Post by minerken on Feb 4, 2017 20:32:31 GMT -5
Fossilman mine is a 8-32 x 1/8 screw. I replaced mine with a flathead machine screw with a hex for an Allen wrench should be able to find in ace or any other hardware store.
|
|
Fossilman
Cave Dweller
Member since January 2009
Posts: 20,723
|
Post by Fossilman on Feb 4, 2017 21:23:04 GMT -5
Awesome,I will drop by the hardware store and pick a few up...thanks
|
|
