sdkidaho
off to a rocking start
Member since May 2017
Posts: 17
|
Post by sdkidaho on May 17, 2017 11:17:28 GMT -5
The saw we are using is a 6" blade with a 1/2" arbor. It's on an older model of the Lortone LU6X-130.
What blade would you recommend and where do you prefer to buy your blades from?
Thanks!
|
|
|
Post by woodman on May 17, 2017 11:53:46 GMT -5
It would depend on what you are cutting and how thick of a kerf you can handle. On mine I have a real thin blade, and they are cheap on ebay. I see 5 for 20 bucks from china.
|
|
|
Post by johnjsgems on May 17, 2017 12:48:21 GMT -5
If you are a beginner stay with thicker blades until you get some practice. Unless you are cutting expensive rock. BD/MK303C 6" X .032" X 1/2" would serve you well.
|
|