Post by QuailRiver on May 18, 2017 1:16:56 GMT -5
*UPDATE 5/18/2017 10:15pm - SOLD - Thank you everyone!
I have an Ultra Tec V2 Faceting Machine Base for sale for $595 plus shipping from piedmont North Carolina (will only ship within the continental U.S. forty-eight states). Ultra Tec made their V2 Faceting Machines with these white laminated bases for only a couple of years in the early to mid 1990s.
This sale is for the motorized base, rubber splash pan shield, lap flange washer, and a generic lap nut. Only what is shown in the photos - No UT mast nor other UT accessories came with this machine when I bought it at a local auction, and only what is shown here in the photos is being sold with it now.
This machine has been well cared for and is in good condition. But it should be noted that the original UT lap nut is missing and has been replaced with a generic one which doesn't have the unthreaded extension on the lower section like the Ultra Tec made ones do. So when using the thinner type laps like NuBond, or solid steel laps then you must use the included lap flange washer (which I believe was Ultra Tec made). The lap flange washer mounts between the lap and the lap nut and has a rubber gasket on the underneath side to protect the lap's surface. Or order a V2 lap nut from UT. Also the original UT rubber feet have been replaced with generic feet.
All is in good condition. I have tested this machine and everything functions properly. The electronics, the bearings and the drive cone are all good.
So if you have a spare faceting mast that fits this type of slotted top machine, or plan on home making one, then this will be a good base for you.
If interested in purchasing please note your intension to do so on this thread. And PM me with your shipping address and the email address you would like your invoice sent to and I will package and weigh the machine for a shipping quote and then send you a Pay Pal Invoice with the total including shipping cost to your address. I will likely be listing this item in other venues too, so preference will be given to the first person who PMs with a commitment to buy.
Thanks for looking!
Larry C.
I have an Ultra Tec V2 Faceting Machine Base for sale for $595 plus shipping from piedmont North Carolina (will only ship within the continental U.S. forty-eight states). Ultra Tec made their V2 Faceting Machines with these white laminated bases for only a couple of years in the early to mid 1990s.
This sale is for the motorized base, rubber splash pan shield, lap flange washer, and a generic lap nut. Only what is shown in the photos - No UT mast nor other UT accessories came with this machine when I bought it at a local auction, and only what is shown here in the photos is being sold with it now.
This machine has been well cared for and is in good condition. But it should be noted that the original UT lap nut is missing and has been replaced with a generic one which doesn't have the unthreaded extension on the lower section like the Ultra Tec made ones do. So when using the thinner type laps like NuBond, or solid steel laps then you must use the included lap flange washer (which I believe was Ultra Tec made). The lap flange washer mounts between the lap and the lap nut and has a rubber gasket on the underneath side to protect the lap's surface. Or order a V2 lap nut from UT. Also the original UT rubber feet have been replaced with generic feet.
All is in good condition. I have tested this machine and everything functions properly. The electronics, the bearings and the drive cone are all good.
So if you have a spare faceting mast that fits this type of slotted top machine, or plan on home making one, then this will be a good base for you.
If interested in purchasing please note your intension to do so on this thread. And PM me with your shipping address and the email address you would like your invoice sent to and I will package and weigh the machine for a shipping quote and then send you a Pay Pal Invoice with the total including shipping cost to your address. I will likely be listing this item in other venues too, so preference will be given to the first person who PMs with a commitment to buy.
Thanks for looking!
Larry C.
