smittys
starting to spend too much on rocks
Member since August 2017
Posts: 165
|
Post by smittys on Aug 12, 2017 21:58:36 GMT -5
|
|
|
Post by coloradocliff on Aug 12, 2017 22:07:01 GMT -5
Keep at it Cowboy. Practice and finding the time to do it is key. Personally I would practice on softer and cheaper stones at first. Bet in a few weeks you'll look really good. Really accomplished people on the wheels like. zarguy Tommy rockjunquie could all give you pointers. A lot of other folks too but these guys are always on line, helpful or at their wheels. You probably have been studying tutorials and just need the time and materials to practice. Yah got the material... for 500 years.. grin,.
|
|
zarguy
fully equipped rock polisher
Cedar City, Utah - rockhound heaven!
Member since December 2005
Posts: 1,791
|
Post by zarguy on Aug 12, 2017 22:45:53 GMT -5
smittys, good to see your work. Keep on making more cabs. Make curves smooth & flowing. No bumps or lumps. It takes eyes to see the shape forming as you shape on the coarse wheel. It also takes feel. As you roll the edge of the cab on the wheel, you can feel anything that makes the curve less than smooth & flowing. Put pressure on the high spots & ease off for the low spots. Eventually the curve will become more pleasing. I see you're using dop sticks. Some people refuse to use dop sticks, but they give you better control. I wait for your next batch. Lynn
|
|
|
Post by aDave on Aug 12, 2017 22:48:50 GMT -5
Welcome back. Glad you took a breath. I am not a cabber, so I can't offer any input. Enjoy your time here. PS: Reply to this post, and you're at 100. Dave
|
|
|
Post by vegasjames on Aug 12, 2017 23:31:59 GMT -5
I agree with Colorado Cliff. It is much easier to learn on softer stones.
Have some nice looking material though. Do you know what the white one is, third photo down?
|
|
zarguy
fully equipped rock polisher
Cedar City, Utah - rockhound heaven!
Member since December 2005
Posts: 1,791
|
Post by zarguy on Aug 13, 2017 0:05:31 GMT -5
I disagree about soft stones. When I teach someone to cab, I start with agate such as Montana Moss agate. Yes, it's hard, but consistently so. It's much easier to cut a single hardness. Also I feel that it's easier to have it grind away slowly. You learn control better. Lynn
|
|
|
Post by MrP on Aug 13, 2017 7:45:01 GMT -5
Welcome Back. This is truly a great place for learning about and sharing rocks.......................................MrP
|
|
|
Post by rockjunquie on Aug 13, 2017 8:03:34 GMT -5
Welcome back! I love me some cab pictures! You like like you are off to a good start. I agree with Lynn zarguy about the hard stones. Much more forgiving. Stick around. We have lots of good info on cabbing and on picture taking.
|
|
|
Post by accidentalrockhound on Aug 13, 2017 9:06:09 GMT -5
Your rocks rock,think I said that right,j say learn on the beat material, so that wah you are encouraged to do good,coming along great smitty,
|
|
|
Post by captbob on Aug 13, 2017 10:12:09 GMT -5
Knew he would miss us! Welcome back. Take 2 is off to a good start.
|
|
|
Post by pghram on Aug 13, 2017 16:18:58 GMT -5
That's a great start. I'll also vote for learning on harder more consistent material. It's easier to keep everything even and will provide a great shine.
Peace, Rich
|
|