Adding Work Table Storage Drawers
Sept 12, 2017 13:08:36 GMT -5
unclesoska, minerken, and 3 more like this
Post by 1dave on Sept 12, 2017 13:08:36 GMT -5
I previously shared my Norm Abrams addition so I could roll my work table where needed, then make it solid.
Lift up and the wheels drop down and lock in place, pull the strings and the wedges pull out and the wheels fold away.
Well lately I needed more drawer storage space for project odds and ends, so . . .
I found some Hefty containers at Walmart - W = 8 1/4", L = 12", D = 6.6".
I made some 1/4" wide rails to fit under the table top 3/4" deep, but that turned out to be too shallow. 7/8" works much better.
2021/10/14 added 2 photos
North Side -
South Side-
Lift up and the wheels drop down and lock in place, pull the strings and the wedges pull out and the wheels fold away.
Well lately I needed more drawer storage space for project odds and ends, so . . .
I found some Hefty containers at Walmart - W = 8 1/4", L = 12", D = 6.6".
I made some 1/4" wide rails to fit under the table top 3/4" deep, but that turned out to be too shallow. 7/8" works much better.
2021/10/14 added 2 photos
North Side -
South Side-
