jackkiu158
off to a rocking start
Member since October 2017
Posts: 2 
|
Post by jackkiu158 on Oct 31, 2017 1:07:11 GMT -5
kinda understand the functionning of this strange aparatus - put the wire in the chuck, twist about 1 1/2" of wire at a time - but where does the full amount of wire go - I'd assumed that it went in the vise, but I noticed that mine does not have a hole at the opposite end to the chuck for the wire to poke through.
|
|
|
|
Post by manofglass on Oct 31, 2017 11:52:02 GMT -5
You trying to twist wire put both ends of the
In a vice put a screw in hook in a drill
Hook onto the loop in the wire pull up a little
On the drill turn the drill on twist the wire
That is the way I do it
Walt
|
|
|
|
Post by rockjunquie on Oct 31, 2017 11:58:17 GMT -5
Are you trying to twist 2 wires together, one wire or are you coiling?
|
|
