jamesp
Cave Dweller
Member since October 2012
Posts: 36,561
|
Post by jamesp on Nov 18, 2017 11:47:40 GMT -5
Left 8 stones are out of the rotary. Right side stones at 16 hours AO 220 in vibe. Looks like 12 hours to go to a wet shine. Rotary stones run only 48 hours with last SiC 30 recharge so they are rough. Vibe is turned down to lowest setting so it is actually running slow. So test was run with the most adverse conditions I could muster. Various lighting, cloud, sun, partial cloud(see shadows): One pound 3 ounce Texas petrified wood nugget that was pre-ground a bit. Larger than 1 pound 8 ounces I have problems with bruises in the rotary. By the way, these hammer broken Rio's had seen 4 weeks in the rotary with about 6 clean outs using bulk SiC with a final 2 days with graded SiC 30 and were run with the big rock. They shaped faster than running straight graded SiC 30. Average size is what you see, few smalls.
|
|
jamesp
Cave Dweller
Member since October 2012
Posts: 36,561
|
Post by jamesp on Nov 18, 2017 11:50:44 GMT -5
Final polish to be posted.
|
|