|
Post by Bluesky78987 on Nov 26, 2017 9:38:11 GMT -5
I want to order more and replumb my waste bucket setup. It is thin and flexible and has a special end on it that the clamp goes around. Thanks!
|
|
NDK
Cave Dweller
Member since January 2009
Posts: 9,440
|
Post by NDK on Nov 26, 2017 10:22:43 GMT -5
Looks similar to a dishwasher discharge hose. Not sure of the diameter. Otherwise any hose the correct diameter to fit the drain should work. Reuse the clamp or replace with a worm gear hose clamp.
|
|
|
Post by Bluesky78987 on Nov 26, 2017 13:42:40 GMT -5
Thanks Nate. Will check that out.
|
|
NDK
Cave Dweller
Member since January 2009
Posts: 9,440
|
Post by NDK on Nov 27, 2017 9:39:44 GMT -5
You're welcome. Probably best bet is to bring that hose to the hardware store and tell them you need that diameter but however longer. Will be an easy fix. Let us know how it turns out.
|
|
|
Post by Bluesky78987 on Nov 27, 2017 11:15:05 GMT -5
Thanks. I looked at my existing dishwasher hose, and it's a heavier plastic. This plastic is really soft and flexible/flimsy. Good idea about taking it to the store - I'll do that!
|
|