|
Post by lonetreestudios on Jul 22, 2018 8:25:51 GMT -5
Does anybody have the MK/BD rock vise (SKU 162523, UPC 9233389683) on their machine, and willing to share a pic and dimensions? Believe my MK 1070 has same/similar sliding table and curious how they are attaching the vise down, if through existing, holes, drilling new ones, etc. Thanks!
|
|
|
Post by johnjsgems on Jul 23, 2018 14:31:42 GMT -5
I've had two or three but always sold before getting a chance to use. I have installed many on display equipment at shows. They come with bolts and wingnuts and attach through existing holes in sliding table. You can see a picture on either BD or MK website. It is very simple. Basically an angle 5" x 5" (or maybe 6") turned up about 1.5". One plywood jaw on this 1.5" X 5" end. Another jaw on metal facing it with bolts going through slotted holes to allow for cross feed. If you look up pics on website and then struggle through my description it might make sense.
|
|
|
Post by lonetreestudios on Jul 23, 2018 19:26:22 GMT -5
Gotcha, thanks John!
|
|