|
|
Post by opalpyrexia on Oct 12, 2018 16:52:59 GMT -5
I have some 8" diamond disks available in the following grits: 260, 360, 600, 1200, and 1500. They were part of a purchase at an out-of-business warehouse sale years ago when I was shopping for jewelry tools and supplies. When I saw them I just grabbed them and threw them into one of several boxes that I had filled. I have more than I'll live to use. I do 90-95% of preliminary shaping and sanding of cabs on these disks before they touch any of my wheels. I also use them to flatten and finish the backs of cabs. Like most disks they'll need some breaking in. They have an paper-covered adhesive backing but I'm not sure that it's still good. I just use them as-is on my flat lap. One seller on Etsy is selling these very same disks for $20 to $25 apiece. I checked other disk sources and the lowest that I found was $10 from China on eBay. So I'm selling these for $9 per disk which is $45 for a set of 1 each of the 5 grits, plus flat rate envelope shipping. My preference is to sell 1 set per person. I don't have equal numbers of disks, so I may offer individual disks later depending on interest. 5 sets available. PayPal please. |
|
|
|
Post by Jugglerguy on Oct 12, 2018 17:10:18 GMT -5
I’d like a set, but I have a couple of questions. Are these hard backed disks or flexible? How big is the hole?
|
|
|
|
Post by toiv0 on Oct 12, 2018 17:25:35 GMT -5
I will take a set
|
|
|
|
Post by rockpickerforever on Oct 12, 2018 17:38:57 GMT -5
I would like a set. PM me with details. Can do PayPal.
Jean
|
|
|
|
Post by beefjello on Oct 12, 2018 17:52:07 GMT -5
I would like a set as well, sending a PM.. thanks!
|
|
|
|
Post by orrum on Oct 12, 2018 17:57:03 GMT -5
Count me in for a set.
|
|
|
|
Post by opalpyrexia on Oct 12, 2018 17:57:52 GMT -5
I’d like a set, but I have a couple of questions. Are these hard backed disks or flexible? How big is the hole?
The backs of the disks are steel plate with some flex to them, not like the rigid backs of the Ameritool disks. I just set them onto an Ameritool disk to use.
The hole is 1/2" inch.
|
|
|
|
Post by hummingbirdstones2 on Oct 12, 2018 21:09:52 GMT -5
I'd like that fifth set please. PM sent.
Thanks.
Edit:
Crap. Came back to the thread and re-counted the replies. Guess I missed out... .
|
|
|
|
Post by stonemon on Oct 12, 2018 21:27:36 GMT -5
I am interested in leftovers or a set if it doesn't work for someone... PM me with what is left and I will take some off your hands... Thanks,
Bill
|
|
