|
Post by miket on Apr 2, 2019 19:06:12 GMT -5
Found this Wednesday and I think I'm going to cut it up and make cabs. I'm trying to figure out which side to do...
|
|
|
Post by rockjunquie on Apr 2, 2019 19:54:48 GMT -5
How thick is it?
|
|
|
Post by miket on Apr 3, 2019 9:12:16 GMT -5
I think about an inch or so at it's thickest in the middle. Going to try to get at least three decent cuts out of it- but it may fracture. I'm guessing it's jasper? Either way if you look close it has some really cool features.
|
|
|
Post by miket on Apr 3, 2019 14:55:28 GMT -5
So I cut one of the ends off. What the heck, right, there's always more rocks. Here's the end and the "progress" that I made at lunch with the dremel. It still has a curved bottom that I need to fix and the side to the left on the cut picture was about twice as thick as the right side so I'm dealing with those two things. The biggest worry I have with it is the soft spots right smack dab in the middle... If this one works I'll jump in and cut some more.
|
|
|
Post by rockjunquie on Apr 3, 2019 15:09:46 GMT -5
Sorry- I meant to get back to you, but I was cabbing today (YAY!). Is the same cab you just posted about?
|
|
|
Post by miket on Apr 3, 2019 15:24:36 GMT -5
Sorry- I meant to get back to you, but I was cabbing today (YAY!). Is the same cab you just posted about? Oh, it's ok. No, this is from the rock pictured above in the two pictures. And I'm glad you were cabbing- we expect to see pictures.
|
|
|
Post by rockjunquie on Apr 3, 2019 15:37:16 GMT -5
Sorry- I meant to get back to you, but I was cabbing today (YAY!). Is the same cab you just posted about? Oh, it's ok. No, this is from the rock pictured above in the two pictures. And I'm glad you were cabbing- we expect to see pictures. Ha ha! I just posted some.
|
|
|
Post by vegasjames on Apr 3, 2019 19:39:20 GMT -5
I think the first pic should be the top of the cab Much better patterning.
|
|
|
Post by miket on Apr 4, 2019 11:09:26 GMT -5
I think the first pic should be the top of the cab Much better patterning. Thanks, I think you're right. I cut that first piece off of that side and hopefully will get to work a bit more on it at noon.
|
|
|
Post by fernwood on Apr 4, 2019 11:16:09 GMT -5
The one you cut looks excellent.
|
|
|
Post by miket on Apr 4, 2019 11:23:39 GMT -5
The one you cut looks excellent. I think so, too. I have high hopes for it, wish me luck!
|
|
|
Post by miket on Apr 4, 2019 14:47:59 GMT -5
Here's where this one is at now. Next it's going into the tumbler. I think it's too high but I didn't want to lose the patterns... Thanks for looking.
|
|