Dire Need of Threaded, Keyed Shaft

new

« Prev
1
Next »

charleslleaf
off to a rocking start

Member since September 2020
Posts: 4

Dire Need of Threaded, Keyed Shaft Sept 6, 2020 12:44:47 GMT -5

Quote

Post by charleslleaf on Sept 6, 2020 12:44:47 GMT -5

Greeting folks.

I am new to this forum which looks like a wealth of information I will enjoy reading through.

Currently, I am in dire need of a partially keyed threaded shaft as follows:

8" long by 3/4" diameter
Keyed to 2 1/2" long by 3/8" wide
5/8” thread length

This shaft (now unfortunately bent) fits in my Highland Park rock saw. See the shaft here... link

Does anyone know what they call this type of shaft, and where I could possibly find one?

Your help would be greatly appreciated.

Much thanks,
Charles

Last Edit: Sept 6, 2020 12:56:54 GMT -5 by charleslleaf

hummingbirdstones
misunderstood rock expert

Member since October 2017
Posts: 14,143

Member is Online

Dire Need of Threaded, Keyed Shaft Sept 6, 2020 15:42:35 GMT -5

Quote

Post by hummingbirdstones on Sept 6, 2020 15:42:35 GMT -5

Hi and welcome from Northern Arizona!

Check with HP to see if they have one here. If you don't see it on there you can give them a call to see if they can help you out.

Robin

"Of all tyrannies, a tyranny sincerely exercised for the good of its victims may be the most oppressive. It would be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated; but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience."
~ C.S. Lewis

It's a long way down the rabbit hole, Alice. ~ Ren

stonemon In Memoriam RIP Bill, aka stonemon Member since January 2017 Posts: 1,024	Dire Need of Threaded, Keyed Shaft Sept 6, 2020 15:56:13 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by stonemon on Sept 6, 2020 15:56:13 GMT -5 Welcome to the forum!

noiefish off to a rocking start Member since August 2020 Posts: 20	Dire Need of Threaded, Keyed Shaft Sept 7, 2020 11:38:58 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by noiefish on Sept 7, 2020 11:38:58 GMT -5 Is it your arbor shaft? You should be able to find it by cling on the "Arbor Parts" subsection for your saw part.

melhill1659 driving up their electric bill Certifiable Rocklicker Member since November 2016 Posts: 2,060	Dire Need of Threaded, Keyed Shaft Sept 15, 2020 17:24:46 GMT -5 via Tapatalk Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by melhill1659 on Sept 15, 2020 17:24:46 GMT -5 Ask Tony, catmandewe, he refurbishes saws all the time so he may can help.
	Mel

catmandewe
gets rocks for Christmas

Contact me for a discount on DP Products.

Member since April 2007
Posts: 5,462

Dire Need of Threaded, Keyed Shaft Sept 16, 2020 17:47:55 GMT -5

Quote

Post by catmandewe on Sept 16, 2020 17:47:55 GMT -5

I have some that I had machined for me out of high quality steel, they dont have the keyway cut into them but you can drill in your set screws if you want a solid setting.
They are more expensive than the ones that you can buy at Highland Park but I had them use the really good steel.

Tony

Join the adopt a rock program.
Tis a sad thing to see a rock without a good home.

Dealer for CabPro8

Authorized Diamond Pacific Dealer

CabKing affiliate
cabking.myshopify.com?aff=5

catmandewe gets rocks for Christmas Contact me for a discount on DP Products. Member since April 2007 Posts: 5,462	Dire Need of Threaded, Keyed Shaft Sept 16, 2020 17:49:20 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by catmandewe on Sept 16, 2020 17:49:20 GMT -5 Which saw is this off of?
	Join the adopt a rock program. Tis a sad thing to see a rock without a good home. Dealer for CabPro8 Authorized Diamond Pacific Dealer CabKing affiliate cabking.myshopify.com?aff=5

charleslleaf
off to a rocking start

Member since September 2020
Posts: 4

Dire Need of Threaded, Keyed Shaft Sept 17, 2020 10:45:29 GMT -5

Quote

Post by charleslleaf on Sept 17, 2020 10:45:29 GMT -5

Sept 16, 2020 17:49:20 GMT -5 catmandewe said:

Which saw is this off of?

An old 14" Highland Park Slab Saw.

I was finally able to find an arbor shaft that will fit. Appreciate everyone's help here. Thanks so much.

« Prev
1
Next »

Chat Box v.2

This space is for temporary chat only and all posts drop off automatically and are not saved.
Members with real questions or comments that need an actual response, please post on the main forum - not here!
Casual PG-13 posts only, no politics or religion please!

RickB:

Nov 14, 2024 21:28:27 GMT -5

amygdule:

Nov 14, 2024 23:45:10 GMT -5

amygdule:

Nov 15, 2024 1:46:48 GMT -5

RickB:

Nov 15, 2024 7:10:24 GMT -5

rocknrob: Holey Moooley Nov 15, 2024 11:53:09 GMT -5

vegasjames: Must be a Swiss cow. You know, these are only cows you can get Swiss cheese from. (laugh)

Nov 15, 2024 17:44:51 GMT -5

RickB:

Nov 15, 2024 18:09:19 GMT -5

parfive: The Scooter knows. Nov 16, 2024 0:36:53 GMT -5

RickB: In theme with things - today is National Bread Day Nov 17, 2024 6:53:42 GMT -5

dshanpnw: The slice of life. Nov 17, 2024 9:35:37 GMT -5 *

parfive: The greatest thing in its day. Nov 18, 2024 13:57:33 GMT -5

amygdule:

Nov 19, 2024 12:31:50 GMT -5

RickB: Stop loafing and take your buns to Agate Beach after the storm Nov 20, 2024 11:57:52 GMT -5 *

amygdule: The Ocean is still tumbling with 20 foot waves...11/20/2024

Nov 20, 2024 20:08:47 GMT -5

rocknrob:

Nov 20, 2024 21:54:31 GMT -5

rocknrob: That was one heck of a windstorm that thankfully missed me. I guess Seatac almost hit 60mph gusts. I bet those were some fun landings Nov 20, 2024 21:55:16 GMT -5

rocknrob: I'll always love my pet rock, he's such a geode boy. Nov 22, 2024 9:27:33 GMT -5

RickB: