|
|
Post by stardiamond on Oct 23, 2020 19:07:59 GMT -5
I got two small pieces of Tahoma rough from Blairrock. The one on top is vee shaped and will even out to a singe cab slab. The bottom slab is zig zag shaped. The area to the left of the line is thick and will split it and have two bottoms and grind down the tops. The area to the right is too thin to split. I'll use the 80 grit end lap to flatten the side that is the least work.  |
|
|
|
Post by stardiamond on Oct 26, 2020 13:47:29 GMT -5
The picture on top is the new face and the one on the bottom the original face. The new face has a kind of OJ look. There is a healed fracture that goes all the way through. I broke up the larger one into three pieces and the inside has different colors than what was shown and I'll work on those in the future.   |
|
|
|
Post by stardiamond on Nov 18, 2020 17:37:54 GMT -5
Some more Tahoma from blairrock. I should be able to get some nice cabs from it.  |
|
kyoti
has rocks in the head
Member since June 2020
Posts: 542
|
Post by kyoti on Nov 19, 2020 7:52:49 GMT -5
The patterns on the rock are very interesting with those pale colors. Pretty material  |
|
|
|
Post by stardiamond on Nov 19, 2020 13:53:49 GMT -5
Really nice pattern on the first on the left of the second picture. I'll grind down the two pears and then if I don't like the patterns, flatten them into bottoms.   |
|
|
|
Post by stardiamond on Nov 20, 2020 14:23:27 GMT -5
The one on the right had a fracture and wasn't attractive so I gave up. Second from left other side wasn't as nice so I flattened it into a bottom. It ahs some issues but is nice enough to finish. The other two have some healed fractures with some color os I will finish those.  |
|
