iam00gt1
off to a rocking start
Member since April 2021
Posts: 1
|
Post by iam00gt1 on Apr 15, 2021 21:53:29 GMT -5
I just was gifted an 18" Royal Rock saw, however, it's missing the main belt and belt cover from the side.
I've seen a few pictures and descriptions around here, but nothing with a manual or parts list.
Does anyone know where I could get a replacement belt and a service or user manual? I'm hoping to do a complete tear down, clean, and rebuild this month.
|
|
quartz
Cave Dweller
breakin' rocks in the hot sun
Member since February 2010
Posts: 3,359
|
Post by quartz on Apr 15, 2021 22:27:38 GMT -5
Replacement belts are available from a good auto parts store or industrial supply. Measure total distance over the tops of the pulleys, drive, driven, and the space between to get outside length of the belt. The width of the pulleys across the top of the groove sets belt width, likely 1/2 inch. I have a 16" Royal and have worked on several others, never have seen a belt guard or a place to mount one.
|
|