|
Post by victor1941 on Aug 1, 2021 16:31:11 GMT -5
|
|
|
Post by Rockindad on Aug 1, 2021 18:46:07 GMT -5
victor1941 beautiful materials yet again! How far do you take these (as in what grit wheel) before you put them in your vibe?
|
|
|
Post by Pat on Aug 1, 2021 18:55:32 GMT -5
Beautiful cabs! Wow! Thanks.
|
|
|
Post by victor1941 on Aug 1, 2021 20:27:13 GMT -5
Rockindad, I work the basic shape on a 60 or 80 grit flat lap (8"). I work the outside shape and edges (bevel) and remove any saw kerf marks on the bottom with a 280 grit lap. The dome is usually not reworked after the initial grind. The UV-18 is used for all other steps.
|
|
reeniebeany
starting to spend too much on rocks
Rotary Only
Member since January 2020
Posts: 125
|
Post by reeniebeany on Aug 1, 2021 20:53:54 GMT -5
Just...Wow!
|
|