Wooferhound
Cave Dweller
Lortone QT66 and 3A
Member since December 2016
Posts: 1,432
|
Post by Wooferhound on Aug 5, 2021 19:21:49 GMT -5
Only grit of a certain size is being thrown up and clinging to the lid
|
|
|
Post by miket on Aug 5, 2021 21:39:11 GMT -5
Only grit of a certain size is being thrown up and clinging to the lid Yep
|
|
|
Post by Peruano on Aug 6, 2021 7:04:27 GMT -5
No, I don't always run the vibe without a lid, but I do for an hour or two or if I'm around it while working on other projects. Left off for long periods will result in evaporation (at least in dry New Mexico). Watching the motion is informative about the load (and yes entertaining compared to watching a slab saw hurl oil at the plastic window on the spray cover).
|
|
|
Post by miket on Aug 6, 2021 9:31:33 GMT -5
No, I don't always run the vibe without a lid, but I do for an hour or two or if I'm around it while working on other projects. Left off for long periods will result in evaporation (at least in dry New Mexico). Watching the motion is informative about the load (and yes entertaining compared to watching a slab saw hurl oil at the plastic window on the spray cover). It's pretty dry here, too. But I think I could manage to stand around and watch it for a bit... Thanks again.
|
|
|
Post by stephan on Aug 6, 2021 23:03:53 GMT -5
Alright, you have your answer, itโs either too dry, or you used too much water. Problem solved. ๐
|
|
|
Post by miket on Aug 7, 2021 11:15:35 GMT -5
Alright, you have your answer, itโs either too dry, or you used too much water. Problem solved. ๐ ๐
|
|