terryjh
starting to shine!
Member since July 2021
Posts: 46
|
Post by terryjh on Aug 14, 2021 21:31:52 GMT -5
Asking for thoughts & experiences please on breaking in new ceramic that will be used exclusively for the very final polish stage in a UV10 vibe. I'd prefer not to use Silicone Carbide grit but don't know if, for example, AO500 would have enough 'horsepower' to knock off the edges & remove pits from the ceramic. I'm nervous that I won't get all the SC off the pellets if I use it. I don't want to use brand new pellets for polish. Thoughts? Thanks
|
|
|
Post by perkins17 on Aug 14, 2021 21:56:40 GMT -5
Asking for thoughts & experiences please on breaking in new ceramic that will be used exclusively for the very final polish stage in a UV10 vibe. I'd prefer not to use Silicone Carbide grit but don't know if, for example, AO500 would have enough 'horsepower' to knock off the edges & remove pits from the ceramic. I'm nervous that I won't get all the SC off the pellets if I use it. I don't want to use brand new pellets for polish. Thoughts? Thanks Don't use brand new in polish. I break mine in in the second or first stage and move them through all stages after that only adding broken in ones after that.
|
|
terryjh
starting to shine!
Member since July 2021
Posts: 46
|
Post by terryjh on Aug 15, 2021 12:09:08 GMT -5
Travel together throughout the process...got it. Thanks, Terry
|
|
|
Post by perkins17 on Aug 15, 2021 12:15:44 GMT -5
terryjh, good. I was worried the way I wrote it wouldn't make sense.
|
|