gemmaster
spending too much on rocks
Member since July 2005
Posts: 281
|
Post by gemmaster on Nov 7, 2005 12:47:55 GMT -5
here are 2 refurnbished tumblers nix repairs   |
|
stefan
Cave Dweller 
Member since January 2005
Posts: 14,113
|
Post by stefan on Nov 7, 2005 12:51:55 GMT -5
good looking shop!
|
|
Emerald
spending too much on rocks
Member since August 2004
Posts: 417
|
Post by Emerald on Nov 7, 2005 13:04:38 GMT -5
GemMaster...
What size saw do you use?
Nice layout! You have Lots-o-Tumblers!
|
|
|
|
Post by Noosh9057 on Nov 7, 2005 13:52:36 GMT -5
NICE I would love to have that shop.
Noosh
|
|
|
|
Post by creativeminded on Nov 7, 2005 20:15:22 GMT -5
Well done. Maybe it is time I showed you all my tumbling area.
Tami
|
|
|
|
Post by cookie3rocks on Nov 7, 2005 20:24:53 GMT -5
I feel so much better. I thought I was the only one who let the overflow build up!  Do you like your vibe? I love mine for 600-polish. Keep 'em rollin! cookie |
|
gemmaster
spending too much on rocks
Member since July 2005
Posts: 281
|
Post by gemmaster on Nov 7, 2005 21:09:57 GMT -5
rth friends, i have 3 15 pound thumblers tumbler big reds in line, 2 10 pounders one a refurbished lortone now running a covington green barrel, a raytech tv-5 , a thumblers tumbler 18 vibe , and a refurbished lortone 3 1.5 pounder. the saw is high tech 6 a trade , a raytech 4-5 trim, a lortone 12 slab saw, and a 1970,s great western 18 weight, hydraulic feed, each has its uses the 12 blade is warped new one on the way, 18 blade was bent i straightened out then had to use as a blocking saw after the blade refused to cut uniform slabs will be replaced or repaired asap.thats all the home made belt sander is next door in jewelry shop will pic later. thanks for looking gemmaster
|
|
|
|
Post by rockyraccoon on Nov 7, 2005 21:34:42 GMT -5
nice set up gemmaster. what is the blue thingy behind the lortone tumbler?
kim
|
|
gemmaster
spending too much on rocks
Member since July 2005
Posts: 281
|
Post by gemmaster on Nov 8, 2005 7:37:04 GMT -5
the blue thingy is a tv-5 raytech with a jim nix beverly hillbillies wooden top ,it works well not been used lately will use on small cabs. will photograph jewelry shop next. rippin it for art rider on the storm. gemmaster
|
|
Emerald
spending too much on rocks
Member since August 2004
Posts: 417
|
Post by Emerald on Nov 8, 2005 8:08:00 GMT -5
Wish we lived a bit closer. (I guess we're about 2 hrs away from each other) I have alot of bigger rock that I can't cut on my itty bitty 6" saw.
If I could just get the pieces down to where I can fit them in my own saw....especially the labradorite. (I have 4 gorgeous chunks of that and would ruin it if I took a hammer to it!) I really need to photograph them to show you all!
|
|
gemmaster
spending too much on rocks
Member since July 2005
Posts: 281
|
Post by gemmaster on Nov 8, 2005 20:27:49 GMT -5
will gladly saw it for you for a resonable consideration have 12 inch lortone and a 18 inch boulder saw. will help if i can have cut a lot of labradorite sold some madagascar cabs to a friend tonight . write . gemmaster
|
|
