terryjh
starting to shine!
Member since July 2021
Posts: 46
|
Post by terryjh on Nov 20, 2021 21:18:11 GMT -5
Does anyone have a replacement part number/vendor for a motor that will fit the Thumler AR-1 and AR-2? I don't want the P-Tech from Thumler anymore. Maybe a Dayton or the Fasco that was used on them at one time.
This summer I bought a brand new AR-1 and AR-2 and both motors have gone out. The AR-1 was still under warranty when it died and Al Tumbler very quickly replaced without question but now my AR-2 is growling hard and on death's door. The warranty has expired. Perhaps with a phone call and a nudge he will replace again at no cost but I sure don't want another P-Tech. I'm looking to just buy a better long lasting motor on my own or simply cut my losses and switch to Lortone. Thanks
|
|
|
Post by rmf on Nov 21, 2021 5:20:02 GMT -5
Take an old motor in to WW Granger and see if they can match it.
|
|
terryjh
starting to shine!
Member since July 2021
Posts: 46
|
Post by terryjh on Nov 21, 2021 6:06:10 GMT -5
Ah, good thought. Didn't think about doing that. There is one not too far away from me. Thank you.
|
|