JR8675309
freely admits to licking rocks
Member since August 2019
Posts: 807
|
Post by JR8675309 on Aug 31, 2022 15:56:51 GMT -5
Has anyone used a vertical cabbing machine? There's a local one up for sale. Two wheels each side. Don't know wheel size or how hard swamp out is... maybe my expando is easier:)
|
|
rockbrain
Cave Dweller
Member since January 2022
Posts: 3,054
Member is Online
|
Post by rockbrain on Aug 31, 2022 18:22:11 GMT -5
It would sure be nice for cab backs and other flat stuff. You might not need to do too much swapping with 4 wheels.
|
|
JR8675309
freely admits to licking rocks
Member since August 2019
Posts: 807
|
Post by JR8675309 on Aug 31, 2022 22:20:54 GMT -5
It would sure be nice for cab backs and other flat stuff. You might not need to do too much swapping with 4 wheels. Interesting. Does that mean it may not be useful for shaping? Maybe I'd finally polish some thundereggs!
|
|
quartz
Cave Dweller
breakin' rocks in the hot sun
Member since February 2010
Posts: 3,352
|
Post by quartz on Aug 31, 2022 23:46:31 GMT -5
|
|
|
Post by victor1941 on Sept 1, 2022 8:11:41 GMT -5
JR8675309, I learned how to cab on both this machine and a flat lap. I had no difficulty with either machine but you must change hand/wrist position to work vertically or horizontally. The pads were easily interchanged as shown in Quartz pictures. A flex spout tube was used to direct the water with excellent accuracy.
|
|
JR8675309
freely admits to licking rocks
Member since August 2019
Posts: 807
|
Post by JR8675309 on Sept 1, 2022 10:18:12 GMT -5
JR8675309, I learned how to cab on both this machine and a flat lap. I had no difficulty with either machine but you must change hand/wrist position to work vertically or horizontally. The pads were easily interchanged as shown in Quartz pictures. A flex spout tube was used to direct the water with excellent accuracy. Good to know. I have wrist issues." So I'm curious how you position wrists, does the underside of wrist point down? Well that was my guess until I looked at pics again... looks like they point up. Thanks!
|
|