|
Post by catmandewe on Jan 14, 2015 0:58:59 GMT -5
Just found out it is an Ideal made in Kingman, AZ.
Needs an automatic shutoff but does cut.
Tony
|
|
|
Post by catmandewe on Jan 13, 2015 13:32:51 GMT -5
Broseph82 There is no brand name on it, I went and looked at it and it needs some work on the feed, he says it does cut, I turned it on and it ran.
The Barranca HP14 is a great saw, if you can afford it I would go that way. If you want to save money for other things this is not a bad deal. I didn't buy it because I am not going to pay $500 for a $500 saw and he wouldn't take $300.
|
|
|
Post by catmandewe on Jan 12, 2015 20:55:51 GMT -5
One of my neighbors is selling a 14 or 16" saw for $500, it does need work. He offered it to me last night but I turned it down,if you want it I can go grab it and ship it to you. You will have to do some work to it. Let me know, those deals disappear pretty fast.
Tony
|
|
|
Post by catmandewe on Jan 11, 2015 21:47:21 GMT -5
Now that is a good friend!
|
|
|
Post by catmandewe on Jan 10, 2015 9:37:35 GMT -5
There is a new motel in town called the Stagecoach, the old one burned down and they built a new one with an attached restaurant.
2 more weeks!
Tony
|
|
|
Post by catmandewe on Jan 8, 2015 22:10:32 GMT -5
Was good to meet you Meviva!
Hope to see you at the BBQ.
Tony
|
|
|
Post by catmandewe on Jan 8, 2015 21:53:56 GMT -5
I have made those out of a set of door hinges and a piece of plywood. Works fine. I like to put two hinges on it though to keep it straight.
Tony
|
|
|
Post by catmandewe on Jan 6, 2015 9:27:44 GMT -5
I normally sell them for $6 a lb, but I can cut you guys a break if you want some.
Tony
|
|
|
Post by catmandewe on Jan 6, 2015 0:10:14 GMT -5
Jim, Lee and John, I miss all of you guys. I wandered over to your booth last night John and you weren't there, Some people were needing stuff and I was going to send them to you. Hope all is well.
I have met a few new ones this year. Bill and Susan come visit me pretty often and Diane just got here. Susan stopped by the other day, Brent, Jeff, and a few others have been by. Almost like old home week! It is starting to get going!
|
|
|
Post by catmandewe on Jan 1, 2015 22:11:40 GMT -5
What is reasonably sized Montana agates?
I have lots of Montana agates but everyone has a different idea on what is reasonably sized.
Tony
|
|
|
Post by catmandewe on Dec 28, 2014 21:50:22 GMT -5
Lortone makes an 8x3 drum that takes a slightly larger belt, you probably have some of those belts.
Tony
|
|
|
Post by catmandewe on Dec 25, 2014 0:08:00 GMT -5
He probably kept the liner because he was a terrorist (or just making firecrackers) and was tumbling high explosives to get a better mix, the liners absorb the powder and become volatile afterwards. [clear throat]Ahemmm... Exactly how is it you know this little tidbit of logistical information? lol I think I heard that somewhere!
|
|
|
Post by catmandewe on Dec 24, 2014 16:53:05 GMT -5
He probably kept the liner because he was a terrorist (or just making firecrackers) and was tumbling high explosives to get a better mix, the liners absorb the powder and become volatile afterwards.
|
|
|
Post by catmandewe on Dec 21, 2014 13:38:12 GMT -5
I think it would work. You would probably have to redesign everything but I think it is possible and it should work fine as long as the center part stays clamped.
Tony
|
|
|
Post by catmandewe on Dec 20, 2014 2:21:57 GMT -5
Happy Birthday Scott!
|
|
|
Post by catmandewe on Dec 18, 2014 22:04:05 GMT -5
The larger the wire the better your motor will work. 14g should be OK but 12g is better. Is this a used motor or a new motor?
I can't tell from the picture which post the blue wire is on.
For 115V CW rotation you need Post 1 - white wire post 2 - red wire post 3 - blue wire post 4 - black wire
L1 is the black wire from your cord (assuming your cord is black/white/ bare or green, if it is not you need to figure out which one is the line) L2 is the white wire from your cord The ground (bare or green wire from your cord) goes on the green screw.
Have fun with it...............Tony
|
|
|
Post by catmandewe on Dec 17, 2014 21:21:06 GMT -5
So Sorry to hear. My prayers are with you.
Tony
|
|
|
Post by catmandewe on Dec 16, 2014 22:15:49 GMT -5
I will be at Desert Gardens Booth A22B22. Right next to the Diamond Pacific building.
Tony
|
|
|
Post by catmandewe on Dec 16, 2014 1:02:30 GMT -5
Oh now she has appealed the decision, the drama continues.
Tony
|
|
|
Post by catmandewe on Dec 15, 2014 21:45:44 GMT -5
I don't think they have any parts for those left. We were talking about them last year and they were wishing they had more of them.
Tony
|
|