|
|
Post by rockjunquie on Oct 1, 2023 16:56:39 GMT -5
I knew it would turn out great!! Who made the wheel(s) with the high spots? That shouldn't have happened.
|
|
|
|
Post by Starguy on Oct 1, 2023 16:59:34 GMT -5
Whoa! That turned out fantastic Peta.
It looks perfect to me and the agate was pretty killer to start.
I’m happy you got the rough spots smoothed out. I bet you had a big smile on your face when you were finishing that beauty.
|
|
realrockhound
Cave Dweller 
Chucking leaverite at tweekers
Member since June 2020
Posts: 4,495
|
Post by realrockhound on Oct 1, 2023 18:25:44 GMT -5
  Ok!! From start (beginning of thread) to finish, here it is (finally ha!). I definitely had a high spot not only on the 80 but the other hard wheel too. I'm pretty confident I got rid of it on an agate chunk. These results are much much better and probably my favorite and best cab so far. I do have a bit of angling on the corners along the girdle, but I know they are there and will work on that. Thanks for all of the advice on this one - I admit it intimidated me a bit. Ayyyy… look at that. A cabbin machine you’ve become |
|
rocknewb101
fully equipped rock polisher
Member since October 2022
Posts: 1,368
|
Post by rocknewb101 on Oct 1, 2023 20:30:16 GMT -5
|
|
rocknewb101
fully equipped rock polisher
Member since October 2022
Posts: 1,368
|
Post by rocknewb101 on Oct 1, 2023 20:31:13 GMT -5
Thank you!  |
|
rocknewb101
fully equipped rock polisher
Member since October 2022
Posts: 1,368
|
Post by rocknewb101 on Oct 1, 2023 20:36:35 GMT -5
I knew it would turn out great!! Who made the wheel(s) with the high spots? That shouldn't have happened. Yay! Thank you - it was worth the wait! Seriously - you had one job!  Whoa! That turned out fantastic Peta. It looks perfect to me and the agate was pretty killer to start. Ayyyy… look at that. A cabbin machine you’ve become [/quote] realrockhound - Thanks so much! I'm pretty stoked **somehow I messed up the coding here...** |
|
rocknewb101
fully equipped rock polisher
Member since October 2022
Posts: 1,368
|
Post by rocknewb101 on Oct 1, 2023 20:39:37 GMT -5
Whoa! That turned out fantastic Peta. It looks perfect to me and the agate was pretty killer to start. I’m happy you got the rough spots smoothed out. I bet you had a big smile on your face when you were finishing that beauty. I don't know what I did to the coding , but it wiped out my comment.... Thank you!! I'm quite pleased with it, especially that I was able to turn it around. |
|
johnthor1963
starting to spend too much on rocks
Cattle dogs rock
Member since June 2023
Posts: 236
|
Post by johnthor1963 on Oct 14, 2023 8:08:05 GMT -5
Funny how it turns out you think you’re doing something wrong or you’re rushing through the process. But then you find a tool failure and when that happens you bang your head on the desk. Once fixed you end something awesome and you have done that. All the responses to this post have helped us all. Thank for sharing I know it will help me. Once again very nice work.
|
|
|
|
Post by jasoninsd on Oct 14, 2023 8:12:13 GMT -5
Ok!! From start (beginning of thread) to finish, here it is (finally ha!). I definitely had a high spot not only on the 80 but the other hard wheel too. I'm pretty confident I got rid of it on an agate chunk. These results are much much better and probably my favorite and best cab so far. I do have a bit of angling on the corners along the girdle, but I know they are there and will work on that. Thanks for all of the advice on this one - I admit it intimidated me a bit. It only took me two weeks to see you posted your finished product! LOL Peta, that turned out amazing!! Definitely a top-notch cab of which to be proud!! Way to go!! |
|
rocknewb101
fully equipped rock polisher
Member since October 2022
Posts: 1,368
|
Post by rocknewb101 on Oct 14, 2023 15:46:14 GMT -5
Funny how it turns out you think you’re doing something wrong or you’re rushing through the process. But then you find a tool failure and when that happens you bang your head on the desk. Once fixed you end something awesome and you have done that. All the responses to this post have helped us all. Thank for sharing I know it will help me. Once again very nice work. Thank you so much! This group is truly amazing and I'm glad we all have the opportunity to learn from each other Ok!! From start (beginning of thread) to finish, here it is (finally ha!). I definitely had a high spot not only on the 80 but the other hard wheel too. I'm pretty confident I got rid of it on an agate chunk. These results are much much better and probably my favorite and best cab so far. I do have a bit of angling on the corners along the girdle, but I know they are there and will work on that. Thanks for all of the advice on this one - I admit it intimidated me a bit. It only took me two weeks to see you posted your finished product! LOL Peta, that turned out amazing!! Definitely a top-notch cab of which to be proud!! Way to go!! haha!! it's all good!! Thank you very much It's my favorite and best so far, I think. |
|
Nov 14, 2024 18:17:57 GMT -5
*
Nov 14, 2024 18:17:57 GMT -5
*
Nov 15, 2024 17:44:51 GMT -5
Nov 15, 2024 17:44:51 GMT -5
