|
Post by glennz01 on Jan 7, 2017 20:22:51 GMT -5
January 2017 Fun Cab Challenge This is a challenge to yourself... What is the best cab that you can create... posting the results of your creation whatever the outcome (just because the cab may not be the best please post anyway and if you like ask for feedback to improve). Theme chosen by prior month winner gemfeller : Picture jaspers of various kinds. Rules: All hand made cabbing techniques may be used. Cabs entered must be hand shaped (can be finished in a tumbler) and be completed by the last minute of the month in your timezone. They can be started before the month but only finished during the month. You must have 1 photo of ether a preform or slab of the rock. You can enter up to 3 individual finished piece (not combined) photos and 1 of the 3 photos will be used for voting to see what cab folks like the most (please note the photo you want used). You can change your photos or improve your cab and place new photos in your original post replacing old photos by the deadline. Finished jewelry cabs may not be entered (unless otherwise specified by the theme). It is OK if there is a hole drilled in the cab without a jump ring, as long as there is no extras on the rock (wire, chord, etc.) All entries submitted to this contest must be unique to this competition (not submitted in several different competitions). Any duplicates will not be included in the voting list. Feel free to share with us the story behind your workings or material. Also, don't forget to include the name of the material. If a tie occurs in the voting the breaker will be whoever submitted the finished item first. If there are any questions feel free to ask. Beginners to old timers are welcome. Prize : winner is allowed to chose theme for the month following voting and a physical prize of a faceted stone provided by micellular
|
|
rivarat
starting to spend too much on rocks
Member since June 2016
Posts: 140
|
Post by rivarat on Jan 14, 2017 3:34:51 GMT -5
I'll be first. I didn't have any picture jasper except for the piece of Owyhee that Tommy had sent over. Had actually planed it before Christmas but I was waiting on the silver settings to arrive before I got cutting. The settings finally arrived last week.
|
|
metalsmith
Cave Dweller
Member since October 2012
Posts: 1,537
|
Post by metalsmith on Jan 14, 2017 9:59:05 GMT -5
No relevant jasper... maybe I'm out of the picture on this one. Noting the abstract design on rivarat submission so far, I may just have a chance of finding something. Nice one rivarat!
|
|
NDK
Cave Dweller
Member since January 2009
Posts: 9,440
|
Post by NDK on Jan 14, 2017 11:25:04 GMT -5
I agree, beautiful cab. Not to mention your perfect circle. Bravo!
|
|
Tommy
Administrator
Member since January 2013
Posts: 12,989
|
Post by Tommy on Jan 14, 2017 21:47:26 GMT -5
Beautiful cab rivarat - as Nate pointed out your circle is spot on. I suck at circles - they usually turn into "freeform" haha. I don't have much time left before our trip to Quartzsite but I'll try to start something now and finish it when we get home. It's been a crazy-busy month so far with family drama at every turn. I can hardly believe the month is half over.
|
|
|
Post by rockjunquie on Jan 15, 2017 9:59:48 GMT -5
Beautiful cab rivarat - as Nate pointed out your circle is spot on. I suck at circles - they usually turn into "freeform" haha. I don't have much time left before our trip to Quartzsite but I'll try to start something now and finish it when we get home. It's been a crazy-busy month so far with family drama at every turn. I can hardly believe the month is half over. Ditto on the circles! OH CRAP! When you mentioned the month was half over, I was like, no way! Then I looked down at the "puter calendar. IT IS! WOW! Time has been flying....
|
|
rivarat
starting to spend too much on rocks
Member since June 2016
Posts: 140
|
Post by rivarat on Jan 16, 2017 0:08:01 GMT -5
I agree, beautiful cab. Not to mention your perfect circle. Bravo! I just realised with everyone commenting on my perfect circle, I might have to retract my cab for the month as I used the faceting arm with the indexing locked open to preform the circle. After that all hand done on the lap. So I feel that I should retract my entry, might have to go back out to the shed and try again, maybe oval - can't do that with the faceting arm.
|
|
|
Post by glennz01 on Jan 16, 2017 1:47:58 GMT -5
I agree, beautiful cab. Not to mention your perfect circle. Bravo! I just realised with everyone commenting on my perfect circle, I might have to retract my cab for the month as I used the faceting arm with the indexing locked open to preform the circle. After that all hand done on the lap. So I feel that I should retract my entry, might have to go back out to the shed and try again, maybe oval - can't do that with the faceting arm. It is still a cab and you hand made at least part of it so it still qualifies. It doesn't have to be 100% hand made.
|
|
micellular
has rocks in the head
Rock fever is curable with more rocks.
Member since September 2015
Posts: 640
|
Post by micellular on Jan 17, 2017 11:55:23 GMT -5
Since I'm still out of cabbing commission, I'll chuck in a faceted stone as the month's prize.
|
|
|
Post by glennz01 on Jan 17, 2017 13:44:26 GMT -5
Since I'm still out of cabbing commission, I'll chuck in a faceted stone as the month's prize. Thanks Micelluar, I hope you can be cab capable soon
|
|
NDK
Cave Dweller
Member since January 2009
Posts: 9,440
|
Post by NDK on Jan 19, 2017 9:54:02 GMT -5
Since I'm still out of cabbing commission, I'll chuck in a faceted stone as the month's prize. That itself is worth the price of admission!
|
|
metalsmith
Cave Dweller
Member since October 2012
Posts: 1,537
|
Post by metalsmith on Jan 22, 2017 13:31:58 GMT -5
Since I'm still out of cabbing commission, I'll chuck in a faceted stone as the month's prize. That itself is worth the price of admission! There's an accolade! Finally I have acquired some PJ. At least it is allegedly en-route... will it get here in time to do anything for this month? Who knows, it's gonna be close!
|
|
|
Post by glennz01 on Jan 22, 2017 21:26:12 GMT -5
That itself is worth the price of admission! There's an accolade! Finally I have acquired some PJ. At least it is allegedly en-route... will it get here in time to do anything for this month? Who knows, it's gonna be close! Its finally gotten warm enough now that i will look through my slabs... it was 30 below.. too cold to use water!
|
|
Erich
spending too much on rocks
Member since November 2015
Posts: 411
|
Post by Erich on Jan 22, 2017 21:42:49 GMT -5
Ya kidding...? that's to cold to get out of bed! I stop cabbing at 60.
|
|
|
Post by glennz01 on Jan 23, 2017 1:45:02 GMT -5
Ya kidding...? that's to cold to get out of bed! I stop cabbing at 60. nope, its still below zero now but warming up a bit.. a high of 10 above currently.
|
|
metalsmith
Cave Dweller
Member since October 2012
Posts: 1,537
|
Post by metalsmith on Jan 23, 2017 8:00:40 GMT -5
Its finally gotten warm enough now that i will look through my slabs... it was 30 below.. too cold to use water! Too cold even for water!
|
|
Tommy
Administrator
Member since January 2013
Posts: 12,989
|
Post by Tommy on Jan 23, 2017 9:47:57 GMT -5
Sadly I will not be able to make a picture jasper cab - I love the theme but we've got two DIY construction projects going on in the house and my desk and garage are so covered with crap I can't even reach my workbench. It's really getting on my nerves - I'm so done with it and want to get back to playing with rocks
|
|
|
Post by glennz01 on Jan 23, 2017 13:21:49 GMT -5
Its finally gotten warm enough now that i will look through my slabs... it was 30 below.. too cold to use water! Too cold even for water! Its warm in the shop which is heated to 40 above but there is a draft coming through.
|
|
Erich
spending too much on rocks
Member since November 2015
Posts: 411
|
Post by Erich on Jan 23, 2017 22:29:56 GMT -5
40 above, that sounds almost do-able... I have my "Blue Nose" certification packed away somewhere
|
|
|
Post by glennz01 on Jan 25, 2017 10:04:38 GMT -5
40 above, that sounds almost do-able... I have my "Blue Nose" certification packed away somewhere The motor on my machine helps keep my hands warm, and i use it to dry off the cabs fast Found my piece of pic jasper that i'll work probably the weekend.
|
|