Deleted
Deleted Member
Member since January 1970
Posts: 0
|
Post by Deleted on Mar 12, 2017 19:23:20 GMT -5
 Finally running. Need a couple belts to get the top tier running. But for now, at least I can get a barrel or two rolling. Pics to follow. Tommy |
|
|
|
Post by wigglinrocks on Mar 12, 2017 19:31:56 GMT -5
"Forever " , last forever or took forever ? Looks like a good build . Half ton capacity ?
|
|
Deleted
Deleted Member
Member since January 1970
Posts: 0
|
Post by Deleted on Mar 12, 2017 19:38:23 GMT -5
White splash panels protect the bearings... jamesp Thanks for the heads up on that issue. Vertical spacer gaurantees parallel bars. This was a huge issue mentally for me. I am not good at perfect anything. But when the structure does it for me, then I'm good.  Built along the same lines as an aquarium stand. Hide the mechanics inside the ends and protect hands. Cover ends and put a screen door over the front and it's kid proof.  |
|
Deleted
Deleted Member
Member since January 1970
Posts: 0
|
Post by Deleted on Mar 12, 2017 19:40:09 GMT -5
"Forever " , last forever or took forever ? YES Maybe 60#? Thanks. |
|
|
|
Post by wigglinrocks on Mar 12, 2017 19:44:08 GMT -5
That should keep a vibe hummin if that's your plan
|
|
|
|
Post by Jugglerguy on Mar 12, 2017 19:48:23 GMT -5
Looks good, Scott. I like the placement of the bearings. What are you planning to have splashing? Tumblers shouldn't be splashing.
|
|
Deleted
Deleted Member
Member since January 1970
Posts: 0
|
Post by Deleted on Mar 12, 2017 19:49:55 GMT -5
Looks good, Scott. I like the placement of the bearings. What are you planning to have splashing? Tumblers shouldn't be splashing. In the unlikely event a barrel breaks or pops the cap off the bearings are protected. Jim had an issue and some bearings destroyed. I had the panel and hole saw. So I included it! Thanks Rob! |
|
Deleted
Deleted Member
Member since January 1970
Posts: 0
|
Post by Deleted on Mar 12, 2017 19:50:41 GMT -5
That should keep a vibe hummin if that's your plan Yes, going to put a table on top and bolt down a Lot-O. And have enough room for a big vibe too. |
|
|
|
Post by wigglinrocks on Mar 12, 2017 19:58:08 GMT -5
Just a thought , some sort of slash guard cover for the barrel shafts , because who doesn't pop the top on the vibe to watch it shake and wiggle .
|
|
Deleted
Deleted Member
Member since January 1970
Posts: 0
|
Post by Deleted on Mar 12, 2017 20:07:05 GMT -5
Just a thought , some sort of slash guard cover for the barrel shafts , because who doesn't pop the top on the vibe to watch it shake and wiggle . Food for thought! Thanks! |
|
NDK
Cave Dweller 
Member since January 2009
Posts: 9,440
|
Post by NDK on Mar 12, 2017 20:09:29 GMT -5
Awesome build Scott!
Congratulations
|
|
|
|
Post by wigglinrocks on Mar 12, 2017 20:10:23 GMT -5
Even a sheet hanging down to keep any slurry off the shafts would work
|
|
|
|
Post by MrMike on Mar 12, 2017 20:33:45 GMT -5
That should keep a vibe hummin if that's your plan Yes, going to put a table on top and bolt down a Lot-O. And have enough room for a big vibe too. Awesome build Scott 👍👍 What are you going to use for barrels? |
|
Deleted
Deleted Member
Member since January 1970
Posts: 0
|
Post by Deleted on Mar 12, 2017 20:36:08 GMT -5
Yes, going to put a table on top and bolt down a Lot-O. And have enough room for a big vibe too. Awesome build Scott 👍👍 What are you going to use for barrels? Using jamesp style PVC barrels. |
|
grizman
freely admits to licking rocks
Member since July 2011
Posts: 878
|
Post by grizman on Mar 12, 2017 20:38:06 GMT -5
I like what you have built there. I wish I had the room for such a critter, but I guess I am lucky to have ALL that I have.
|
|
Deleted
Deleted Member
Member since January 1970
Posts: 0
|
Post by Deleted on Mar 12, 2017 20:42:21 GMT -5
I like what you have built there. I wish I had the room for such a critter, but I guess I am lucky to have ALL that I have. Griz, I threw out a bunch of crap that had accumulated on those shelves over the decades. Took out a shelf and dropped the tumbler in.... Now i plan to make even more room by eating rocks in those barrels. |
|
Fossilman
Cave Dweller
Member since January 2009
Posts: 20,727 
|
Post by Fossilman on Mar 12, 2017 20:49:51 GMT -5
Scott,that is a nice setup!!!!
|
|
vwfence
has rocks in the head
Member since January 2013
Posts: 567
|
Post by vwfence on Mar 12, 2017 20:53:52 GMT -5
what are you useing for barrels
|
|
|
|
Post by MrMike on Mar 12, 2017 20:59:48 GMT -5
Awesome build Scott 👍👍 What are you going to use for barrels? Using jamesp style PVC barrels. That'll work |
|
|
|
Post by Drummond Island Rocks on Mar 12, 2017 21:00:49 GMT -5
Awesome. I also like the vertical bearing idea. I have never had a barrel leak but like the covers for safety reasons. With those and some simple covers on the outside there would be no concerns of danger from the pulleys and belts with kids around. What kind of rocks did you choose for the maiden voyage?
Chuck
|
|
