|
Post by toiv0 on Jan 21, 2020 11:22:43 GMT -5
The vendor I have been getting my 1/2 in magnets from is AWOL. Everything I look at is confusing on line. Not sure how thick they were and believe 12 mm round. Where is everybody ordering theirs from.
Thanks in advance Billy
|
|
cosmetal
starting to spend too much on rocks
Member since September 2018
Posts: 115
|
Post by cosmetal on Jan 21, 2020 11:44:50 GMT -5
toiv0I've used kjmagnetics in the past with good results. I found them while researching gemstone magnetic properties as an aid for gemstone identification Magnetism in Gemstones - a very interesting website. Peace, James
|
|
|
Post by joshuamcduffie on Jan 21, 2020 14:32:22 GMT -5
toiv0 what are you using the magnets for? Please excuse my ignorance.
|
|
|
Post by Drummond Island Rocks on Jan 21, 2020 14:50:38 GMT -5
|
|
agatemaggot
Cave Dweller
Member since August 2006
Posts: 2,195
|
Post by agatemaggot on Jan 21, 2020 15:27:52 GMT -5
Thanks for the link, my wife quit wire wrapping and I have a -- BUNCH-- of finished Cabs hanging around my neck and was wondering what (?) am I going to do with these ?
|
|
RWA3006
Cave Dweller
Member since March 2009
Posts: 4,586
|
Post by RWA3006 on Jan 21, 2020 17:27:09 GMT -5
I get mine at Ace Hardware. I use em for fridge magnets.
|
|
|
Post by toiv0 on Jan 21, 2020 17:40:31 GMT -5
toiv0 what are you using the magnets for? Please excuse my ignorance. Refrigerator magnets, I ran out before the rocks did.
|
|
|
Post by toiv0 on Jan 21, 2020 17:41:25 GMT -5
|
|
|
Post by toiv0 on Jan 21, 2020 17:44:40 GMT -5
Thanks Chuck, tried to search for that thread but my search skills are not so good looki.
|
|
|
Post by knave on Jan 21, 2020 18:33:30 GMT -5
😂 That’s the best looking GOOMAN I’ve ever seen and I’ve seen a bunch.
|
|
|
Post by Drummond Island Rocks on Jan 22, 2020 8:01:49 GMT -5
My circuit panel box is right near my work bench so magnets usually end up hanging out there for awhile. Chuck
|
|
whyofquartz
spending too much on rocks
So, Africa is smaller than I expected...
Member since December 2019
Posts: 318
|
Post by whyofquartz on Jan 22, 2020 13:03:49 GMT -5
i had been thinking about what i might do with my polished rocks. I don't like the idea of just sticking them in a jar since you would not be able to see all of them. Magnets may be the solution especially for the bigger, lumpier ones. do you counter sink the magnets or just stick'em? with hot snot or binary epoxy?
|
|
|
Post by knave on Jan 22, 2020 13:16:54 GMT -5
Binary epoxy...
|
|
|
Post by knave on Jan 22, 2020 13:19:01 GMT -5
I’ve used unitary cyanoacrylate and it worked quite well.
|
|
whyofquartz
spending too much on rocks
So, Africa is smaller than I expected...
Member since December 2019
Posts: 318
|
Post by whyofquartz on Jan 22, 2020 15:27:37 GMT -5
I’ve used unitary cyanoacrylate and it worked quite well. AH, THE SACRED LIBATION.
|
|
|
Post by knave on Jan 22, 2020 15:32:13 GMT -5
Hahahahha! You better not drink it, lol
|
|
agatemaggot
Cave Dweller
Member since August 2006
Posts: 2,195
|
Post by agatemaggot on Jan 22, 2020 16:49:45 GMT -5
Ordered magnets 2-21-20, 10.30 PM. and they shipped today 1-22-20, they don't drag their feet getting orders out the door !
|
|
|
Post by hummingbirdstones on Jan 22, 2020 20:32:24 GMT -5
Ordered magnets 2-21-20, 10.30 PM. and they shipped today 1-22-20, they don't drag their feet getting orders out the door ! Especially when they're sending them back in time! (Sorry, couldn't resist).
|
|
saxplayer
fully equipped rock polisher
Member since March 2018
Posts: 1,327
|
Post by saxplayer on Jan 23, 2020 9:55:06 GMT -5
I recognize some of those! Hope you’re well!
|
|
agatemaggot
Cave Dweller
Member since August 2006
Posts: 2,195
|
Post by agatemaggot on Jan 25, 2020 23:30:28 GMT -5
Half my magnet order came in today, received the 1/8 X 1/2 in. size. They are nasty strong for their size so I placed one on each side of my shower curtain to hold it against the tub. Tried to pull curtain loose and the damn things are so strong they pulled straight thru the curtain ! I am going to be hard pressed to find an adhesive that will hold them securely to a Cab, I think it might be a case of use once and your done, they may never be removable once you stick them on the Fridge ! I think the thinner models will be better for cab attachment , the thick models would be great glued to your shop wall to hold your Lapidary tools in an orderly fashion ! I would bet the bigger magnets would hold a 2 lb. rock hammer in place, no problem !
|
|