|
|
Post by knave on Jul 18, 2020 20:58:06 GMT -5
Voting is open for the Sunset Jasper cabs! What a great batch of entries. Usually I have a clear favorite but not this time! If anything is wrong, missing, or needs to be changed, please let me know. Cab sizes range from 34 to 80 mm.
Voting will end Saturday July 25, at 5 PM CDT.
The lucky (and talented) winner will get a nice gift card to The Rock Shed from fernwood , and some material from woodman , including a polished slab of Sunset Jasper!
Good luck everyone. Have fun, and May the best cab win!!! 👊🏼😎 |
|
billdean
starting to spend too much on rocks
Member since April 2020
Posts: 153 
|
Post by billdean on Jul 18, 2020 21:14:15 GMT -5
Wow…….this one is hard! There is so many great ones.
|
|
|
|
Post by miket on Jul 19, 2020 7:11:09 GMT -5
That was one nice slab!
|
|
|
|
Post by fernwood on Jul 19, 2020 7:32:16 GMT -5
I was in shock when I received it. Still undecided if I will make cabs or leave as is for display. The entries are all wonderful. |
|
|
|
Post by MsAli on Jul 19, 2020 8:31:19 GMT -5
Really nice entries this round!
|
|
|
|
Post by manofglass on Jul 19, 2020 9:25:06 GMT -5
I almost got into this got busy and let it pass
|
|
|
|
Post by woodman on Jul 19, 2020 9:26:21 GMT -5
That was a hard decision, they all are great entries.
|
|
|
|
Post by knave on Jul 19, 2020 11:44:48 GMT -5
I almost got into this got busy and let it pass We’ll let it slide this time Walt.  |
|
|
|
Post by miket on Jul 19, 2020 12:08:22 GMT -5
I almost got into this got busy and let it pass We’ll let it slide this time Walt. Will we, though? 😏 |
|
|
|
Post by knave on Jul 19, 2020 12:23:31 GMT -5
|
|
|
|
Post by manofglass on Jul 19, 2020 12:56:47 GMT -5
We’ll let it slide this time Walt. Will we, though? 😏 New furnace got in the way |
|
jaime
off to a rocking start
Member since June 2020
Posts: 16
|
Post by jaime on Jul 19, 2020 17:04:48 GMT -5
10 is telling me a story with the full moon.
|
|
rxrox
off to a rocking start
Member since July 2020
Posts: 1
|
Post by rxrox on Jul 20, 2020 9:52:28 GMT -5
Beautiful! Hi everyone, I’m new to the forum and stumbled onto it when I looked up Pixie Troubleshooting. I have a cabbing machine that is very loud!
It gets oiled every so often but I’m wondering if I can reduce the noise other than wearing head phones. Is it the bearings?
Thanks, Robin ( rxrox)
|
|
|
|
Post by knave on Jul 20, 2020 10:04:08 GMT -5
Beautiful! Hi everyone, I’m new to the forum and stumbled onto it when I looked up Pixie Troubleshooting. I have a cabbing machine that is very loud! It gets oiled every so often but I’m wondering if I can reduce the noise other than wearing head phones. Is it the bearings? Thanks, Robin ( rxrox) Hello and welcome! My Lortone is doing the same thing, and yes it is the bearings.  It still runs fine but it’s very loud. I assume it means some water has entered and started to rust the bearings. |
|
|
|
Post by knave on Jul 21, 2020 2:32:25 GMT -5
|
|
|
|
Post by knave on Jul 21, 2020 15:48:47 GMT -5
I opened it up so the votes can be viewed before we vote.
Do we like it? If votes seem suppressed we can go back to the closed poll.
My reasoning was if a new joiner comes from Facebook or wherever, I wanted them to see the standings without logging in.
Also hoping to help out the frequent tie situation.
Post your thoughts if so inclined.
|
|
|
|
Post by hummingbirdstones on Jul 21, 2020 18:13:35 GMT -5
I personally like it closed before I vote. Otherwise it's very possible I'm going to start second guessing my first choice and change it. Basically it has to do with me being very nosy and having to see what everyone else voted for.
|
|
|
|
Post by Pat on Jul 21, 2020 18:22:47 GMT -5
I think it is a truer choice made if the poll is not visible during voting.
I do want to see the scoring after voting closes. Thanks.
|
|
|
|
Post by knave on Jul 21, 2020 18:41:17 GMT -5
I appreciate the input.
|
|
|
|
Post by rockpickerforever on Jul 21, 2020 19:25:49 GMT -5
I like seeing the poll live so I can change my vote and be a spoiler  LOL. |
|
