|
Post by manofglass on Apr 11, 2018 10:58:25 GMT -5
You can melt the stained glass James just don’t mix The colors but some of it could turn brown
|
|
|
Post by grumpybill on Apr 11, 2018 11:00:52 GMT -5
I am saturated with unknown glass at this point Disregard the PM I sent.
|
|
jamesp
Cave Dweller
Member since October 2012
Posts: 36,612
|
Post by jamesp on Apr 12, 2018 5:11:01 GMT -5
Agreed. I have reactive top-top on list. Easy to do, just throw the reactive agents between 2 clear fuse able plates and cook. They also used powdered glass, fritted glass, thin confetti glass, sand, metal filings etc. And a raccoon. A raccoon eh? I think these are some of the best you have done
The Kosta Boda artists(meteor series) are some of the most noted for working with reactive agents. This Greek artist was no slouch. I can't take photos well enough to show the color and contrasts. Reactive is a great 'man glass'. Can't wait to get into it. High on bucket list. I have great access to exotic metals at the industrial junkyards over in the factory district for spazzing out glass. I do have some problems with the metals sandwiched because of poor bonding between the 2 plates. Cracking too, mixing with glass is tricky. Tumbling often breaks out glass at the interface.
|
|
jamesp
Cave Dweller
Member since October 2012
Posts: 36,612
|
Post by jamesp on Apr 12, 2018 5:15:29 GMT -5
I am saturated with unknown glass at this point Disregard the PM I sent. Not so fast. You may have some fine fuse able glass at you spot. Would like to cook some up for you Bill. I just need an envelope of small samples. Plus it qualifies as a repurpose way increasing marketability/desirability.
|
|
jamesp
Cave Dweller
Member since October 2012
Posts: 36,612
|
Post by jamesp on Apr 12, 2018 5:18:53 GMT -5
You can melt the stained glass James just don’t mix The colors but some of it could turn brown On the bucket list Walt. Some beautiful glass in that category.
|
|